20 1-1 Seat Belts Tip Do not pull out the belt webbing forcibly during motor start-up, otherwise, the motor will not disengage. If that happens, pull out the webbing with a greater force and insert the buckle for pretensioning. After the motor performs seat belt pretensioning, adjust the seat belt if it is too tight. High-speed pretensioning The motor is activated in advance to retract the webbing in a pre- tensioning manner in case of hazardous situations, such as emergency braking, front collision, rear collision, side collision, to minimize the impact damage to occupants.
Tip If the seat belt cannot be released, move the seat back slightly backwards until the tension of the seat belt decreases and the locking mechanism unlocks. Using Seat Belts 1. Adjust the seat position and backrest angle. (See Electrical Front Seat Adjustment* ) 2. Adjust the position of the three- point seat belt. Keeping a proper sitting posture, pull the seat belt out so that it is diagonally across the chest. The belt should not go under the arm or across the back of the neck. Keep the lap section of the belt as close as possible to the hips.