BYD Han — Installing Child Restraint Systems

● Secure the top tether when installing the child restraint system. Installing Child Restraint Systems Follow the installation instructions provided by the child restraint manufacturer. Secure the child restraints to the rear outboard seats. ● Children must use a suitable child restraint when traveling in the vehicle. Children should sit comfortably and safely. Make sure that the child restraint is positioned, mounted, and used correctly. Installing Child Restraint Systems with ISOFIX Rigid Anchor A special anchorage is provided on the rear outboard seat, and it can be seen after its decorative cover is opened (the label showing the anchorage is attached to the seat).

● If the child is too large to use a high- back child restraint, please sit in the rear outboard seat and follow the installation instructions provided by child restraint manufacturer to use the booster chair attached to the lower anchoring device, or use the seat belt. WARNING ● Never carry a child on your lap in a vehicle journey. ● An appropriate child restraint system must be used for your child. Anchor supports (for the top tether) are provided at the rear outboard seat. ● Please follow the instructions provided with the child restraint system and in this manual to make sure the child restraint is properly installed in the vehicle.

● After the child restraint is dismounted from the seat, store it safely in your trunk. ● Failure to follow the instruction provided with the child restraint and in this manual may cause injuries and even death to your child in an accident. 24