Instruments and Controls Information Centre • Press the OK button in the RH steering wheel multifunction switch pack to confirm or long press the OK button to reset. “OK” button in the RH steering wheel multifunction switch pack. With the vehicle power system in the ON/ READY position, the information centre function can be selected as follows: 1 • Accumulated Total: Displays the trip mileage, trip time, average speed and average power consumption since the last vehicle reset. It can be reset by long pressing the “OK” button in the RH steering wheel multifunction switch pack. 1 Vehicle Information Health Centre 2 Health Centre • Tyre Pressure: displays the current status of each wheel.
3 Settings • Battery Voltage: displays the 12V Battery Voltage. Vehicle Information • Warning Information: displays the warning information or important notes that are currently relevant to the vehicle. • Press the UP/DOWN/LEFT/RIGHT button in the RH steering wheel multifunction switch pack, this will access and display the information centre options. Vehicle Information includes: • Energy Flow: Displays a graphic showing the current state of power flow. Settings • Electrical Information: Displays the current operation state of the vehicle, including the voltage, current and motor speed. Brightness level Displays the current level and allows adjustment of the backlight brightness.
• Press the UP/DOWN button in the RH steering wheel multifunction switch pack to cycle through options. • Current Journey: Displays the trip mileage, trip time, average speed and average power consumption since vehicle start. It can be reset by long pressing the Warning Message Warning messages and prompts are displayed in the information centre in the instrument pack. Any communications are displayed in 11