Instruments and Controls Windows Window Operation Note: The electric windows can be operated with the vehicle power system in the ACC, ON and READY positions. (For safety: doors should be closed). Ensure children are kept clear when raising or lowering a window. 1 Improper use or activation of the electric windows by children could cause serious harm or even death. It is the responsibility of the driver and adult passengers to ensure that when carrying children the necessary steps are taken to isolate the window operation. This should include the removal of the key when children are left alone in the vehicle.
Rear Window Isolation Switch Press the button (5) to isolate the rear window controls, press again to restore control. Note: It is recommended that you ISOLATE the rear window switches when carrying a child. “One-Touch” Down 1 Front Right Window Switch Push the switch (1-4) down to lower, and pull the switch up to raise the window. The window will stop moving as soon as the switch is released (unless the ‘One-Touch’ function is active). The driver’s window control switch (1) has 2 positions. Short press the window control switch to the “2” position and release. The window automatically descends to fully open.
Window movement can be stopped at desired position at any time by operating the corresponding switch during descent. 2 Front Left Window Switch 3 Rear Right Window Switch Note: The front and rear passenger windows can also be operated by individual window switches, mounted on each door. The rear window switches will not operate if the rear window isolation switch has been activated. 4 Rear Left Window Switch 5 Rear Window Isolation Switch 31