PDSMi User’s Manual Motherboard Features CPU • Single Intel Pentium D (Dual-Core)/Pentium 4 Extreme Edition/Pentium 4/Pen- tium Extreme Edition/Celeron D LGA (Land Grid Array) 775 Processors at system bus speeds of 1066 MHz/800 MHz/533 MHz. • Hyper-Threading (HT), EM64T, Enhanced Intel SpeedStep (EIST) supported Using the EM64T Feature • Install a 64-bit OS (Windows XP Professional x64 Ed, Server 2003x64 Ed.) • Install the 64-bit drivers for all MB components, devices and add-on cards Using the Hyper-Threading (HT) Technology • Use a CPU that supports Hyper-Threading Technology • Install an OS that supports HT, including Windows XP/2003 Server and Linux 2.4x.
(Under Linux, use the HT compiler to compile the code. For other oper- ating systems, be sure to disable the HT feature in the BIOS.) • Enable the HT feature in the BIOS (under "Advanced" Setting) before install- ing a supported OS. (*Note: visit www.Intel.com for CPU support and driver updates.) OS Licensing Support • Intel Dual-Core CPU supports: Windows 2000 Professional, Windows Advanced Server, Windows XP Home, Windows XP Professional, Windows • Intel Dual-Core CPU and Hyper-Threading Technology supports: Windows Server 2003 (Standard, Enterprise) 2000 Advanced Server, Windows XP Home, Windows XP Professional, Windows Server 2003 (Standard, Enterprise) Memory (* Note:
See Section 2-4 for details.) • Four DIMM slots support Dual/Single Channel DDRII 667/533/400 MHz up to 8 GB of ECC Unbuffered two-way interleaved DDRII SDRAM. Chipset • Intel E7230 (Mukilteo) • Intel ICH7R • Intel PXH Expansion Slots • One (1) PCI 32-Bit/33 MHz (Slot 1) • One (1) PCI-X 64-Bit 133 MHz slot (Slot 6) + (1) PCI-E x8 (Signal: x8 via Riser Card) (Slot SXB-E1) BIOS • 8Mb Firmware Hub Phoenix BIOS • APM 1.2, DMI 2.3, PCI 2.2, PCI-X 1.0,ACPI 1.0, Plug and Play (PnP), SM- BIOS 2.3, Hardware BIOS Virus Protection 1-6