Change your TV installation 7. When Antenna is selected, the TV detects antenna signals. It searches for NTSC and ATSC channels available in your area. ENGLISH FRANЗAISE ESPACOL The first time you switch on your TV you select the language for the TV menus and make basic choices for picture and sound settings. Use this chapter to reinstall the TV, to set preferences in the TV menus, or to tune new TV channels. When Cable is selected, the TV detects signals supplied by cable. It searches for NTSC, ATSC, and QAM modulated channels available in your area. Select your menu 7.1 language Press 3. OK to start the installation.
If you run Autoprogram when you have locked channels, a message appears asking to enter your PIN code. Enter your PIN code in order to complete the installation. If you have forgotten your PIN , reset it as described in Set or change your PIN section . Press 1. MENU on the remote control and select Installation > Language . Installation Language Settings Language 8 3 English When autoprogramming is complete, this message appears “ Channel search completed Autoprogram Weak channel installation Franзais Espacol Source Clock Follow the on-screen instructions to complete 4. the installation.
HDMI CEC Current software info Reset AV settings Return your settings to default values 7.3 Info This section describes how to return picture and sound settings to their default values. The channel installation settings are not affected. Press 1. MENU on the remote control and select Installation > Reset AV settings . Select a language and press 2. OK to confirm your choice. Press 3. Н to return to the Installation menu. Installation Language Settings Reset AV settings 8 connected. Press 1. MENU on the remote control and select Installation > Autoprogram.
Autoprogram Weak channel installation Start now Source Clock HDMI CEC Current software info Reset AV settings Info Autoprogram Antenna 2 Settings I Installation Press 2. Ж to highlight Start now , and press OK to reset the AV settings. Antenna Cable Start now Press 3. Menu to exit. Info Select 2. Cable or Antenna and press Ж . EN-22 7.2 Autoprogramming This section describes how to search for and store channels automatically. Before you tune channels, ensure that you are registered with your cable TV provider and that your equipment is correctly