3. FUNCTIONAL OVERVIEW 3.1. Top and Front Panel 3.2. Rear Panel 1 2 1 2 3 4 5 1. DC IN jack • Connect to the included AC/DC Adapter to supply power to this unit. 3 • Unplug the AC Power cord from the AC outlet to completely turn off the unit. 4 2. LAN port • Used to connect to network provisioning equipment such as a router or a modem, using a LAN cable. 1. A (open/close) button • Press to open or close the disc tray. 3. HDMI OUT (AUDIO) port • Used to connect to an AV receiver/amplifier with an HDMI compatible port, using an HDMI cable. 2. . (standby/on) button / LED • Press to turn on the unit, or to switch the unit into standby mode.
(To completely turn off the unit, you must unplug the AC/DC Adapter.) • Audio output only. • The . (standby/on) LED lights up when the unit is On, and goes out when the unit is Off. 4. HDMI OUT port • Used to connect to a display with an HDMI compatible port, using an HDMI cable. This HDMI port will only output images when the HDMI OUT (AUDIO) port is in use. 3. Disc tray • Place a disc after opening the disc tray. 4. Infrared sensor window • Receives signals from your remote control so that you can control the unit from a distance. 5. USB input port • Connect a USB storage device or USB card reader.
Caution C • Do not connect any device other than USB storage device or USB card reader into USB input. (e.g. PC, external HDD, MP3 player, digital camera, keyboard, mouse, etc.) • Do not use an extension cord or USB hub to connect devices to this unit. Always connect one single USB storage device or USB card reader into USB input directly. EN 11