Disc Operations Auto Eco Power standby mode This is a power-saving feature, the system will automatically switch to Eco Power standby mode if you do not press any button within 30 minutes after a disc has stopped playing. Basic playback controls English Unless stated, all operations described are based on Remote Control control use. Some operations can be carried out using the DVD System Menu. Pausing playback Using the Disc Menu 1 During playback, press Е . Playback will pause and sound will be muted. Depending on the disc, a menu may appear on the TV screen once you load in the disc. 2 Press Е again to select the next picture frame.
To select a playback feature or item G Use the 1 2 3 4 or numeric keypad (0-9) on the remote, then press B or OK to start playback. 3 To return to normal playback, press B . Searching backward/forward To access or remove the menu G Press DISC MENU on the remote. G Press and hold S / T , then press B to resume normal playback. While searching, pressing S / T again will decrease/increase the search speed. MUTE G Press the MUTE repeatedly to disable and enable the sound output. Stopping playback G Press З . Resuming playback from the last stopped point (DVD/VCD) Resume playback of the last 10 discs is possible, even if the disc was ejected or the power switched off.
1 Load one of the last 10 disc. LOADING ” appears. 2 Press B and the disc will be played back from the last stop point. To cancel the resume mode G In stop mode, press З again. Helpful Hint: Resume option may not be available on some discs. 21 001-041-LX36-22-Eng 21/08/2003, 9:44 AM 21 3139 115 22612