Connections Step 1: Set up the speakers You can choose to mount the speakers on the wall. Attach the supplied bracket firmly to the rear of speakers using the supplied screws. Then mount a screw (not supplied) on the wall where the speaker is to be hung and hook the speaker securely onto the mounted screw. Connect the supplied speaker systems using the fixed speaker cables by matching the colours of the jacks and speaker cables. CAUTION! You should get a qualified person to attach the brackets to the wall. DO NOT do it by yourself to avoid unexpected damage to the equipment or injury to personnel. ~AC MAINS FRONT RIGHT CENTER FRONT LEFT SURR. RIGHT SURR.
LEFT SUB- W SPEAKERS (4 ) Helpful Hints: Ensure that the speaker cables are correctly connected. Improper connections may damage the system due to short-circuit. Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual. Helpful Hints: The surround speakers are labelled as REAR L (left) or REAR R (right). The front speakers are labelled as FRONT L (left) or FRONT R (right). 9 001-041-LX36-22-Eng 21/08/2003, 9:43 AM 9 3139 115 22612 Step 2:
Connecting speakers English and subwoofer Front Front Right Centre Left AUDIO L L M~AAINCS FRRIGOHNTTCENTER SF PRLEOEAFNTKT ERRSR IGE (4AH RT )RLEEAFTR SUWB- R R AUX IN LINE OUT Rear Right Rear Left Subwoofer Front Front Right Centre Left AUDIO L L M~AAINCS FRRIGOHNTTCENTER SF PRLEOEAFNTKT ERRSR IGE (4AH RT )RLEEAFTR SUWB- R R AUX IN LINE OUT Rear Right Rear Left Subwoofer