6 Use more of your TV If device lock is unlocked, [ Device lock] will be displayed. If device lock is locked, [ Device unlock] will be displayed. When device lock is locked, will be displayed at the top right of the device icons. 5 Enter your PIN. (See ‘Setting your PIN’ on page 26.) Once you have set PIN, PIN input menu does not appear after the unit is turned on. Access TV menus Menus help you to install channels, change picture and sound settings Enable or disable RC key forwarding from the home menu This section describes how to enable or disable RC key forwarding for a particular device. 1 Press MENU on the remote control.
2 Use О / п / Н / Ж to select a device to enable or disable RC key forwarding. 3 Press OPTIONS on the remote control. 4 Use О / п to select [ Enable RC key forwarding] or [ Disable RC key forwarding] , then press OK . If RC key forwarding is set to off, [ Enable RC key forwarding] will be displayed. If RC key forwarding is set to on, [ Disable RC key forwarding] will be displayed. When you set RC key forwarding on, will be displayed at the top left of the device icons. Philips Wireless MediaConnect You can enjoy your TV as a PC monitor wirelessly using your home network.
Make sure you download the Philips Wireless MediaConnect software and install it on your PC before you perform the steps below. 1 Launch Philips Wireless MediaConnect on your PC fi rst. 2 Press MENU on the remote control. 3 Use О / п / Н / Ж to select [ Philips Wireless MediaConnect] . The start up screen for Philips Wireless MediaConnect will be displayed and the unit searches for available PC that is running Philips Wireless MediaConnect software. This TV is Wireless LAN Ready. With the USB wireless LAN adapter (supplied accessory: PH2010A) you can connect the TV to your network wirelessly.
By starting Philips Wireless MediaConnect on your PC, you can stream the screen of your PC along with audio to your TV. To use Philips Wireless MediaConnect you need to connect the TV to your home network. Install Philips Wireless MediaConnect 1 Start your internet browser on your PC and open the Philips Wireless MediaConnect download page at www.philips.com/wifi mediaconnect On the website, you can check the necessary PC system requirements. 2 Enter the 12 digit code printed on the cover of the User Manual or back of your TV. 3 Click the 'Download now' button to download the free Philips Wireless MediaConnect software.
4 Once downloaded, start the fi le 'Philips Wireless MediaConnect_ setup.exe'. Follow the instructions on screen. Lock or unlock your device from the home menu This section describes how to lock or unlock specifi ed device. 1 Press MENU on the remote control. 2 Use О / п / Н / Ж to select a device to lock or unlock. 3 Press OPTIONS on the remote control. 4 Use О / п to select [ Device lock] or [ Device unlock] , then press OK . 14 EN then access other features. Access the home The home menu give and sound settings as 1 Press MENU on menu s you easy access to connected well as other useful features. the remote control.
devices, picture Watch TV Browse USB Philips Add new devices Wireless Media... Setup 2 Use Î / ï / Í / Æ to select and navigate through one of the following menus. • [ Watch TV ] Switches back to the antenna source if another source is selected. • [Browse USB] Accesses USB menus. • [Philips Wireless MediaConnect] Accesses Philips Wireless MediaConnect. • [Net TV] Access [NETFLIX], [vTuner], [vudu] or [ Twitter]. • [Add new devices] Adds new devices to the home menu. • [ Setup] Accesses menus that allow you to change picture, sound and other TV settings. 3 Press OK to confi rm your choice. 4 Press MENU to exit.
Tip • After selecting [ Add new devices], follow the on-screen instructions to select the correct device and connector. Note • This function is available only when your devices are connected to this unit through HDMI cables and assigned to an HDMI port (HDMI1 to HDMI4) with [Add new devices] in the home menu. Philips Wireless Media...