Changing picture and sound settings 5 Press MENU to exit. EN 22 Setting items Description Active control Off Sets Active control to off. On with Light Sensor Adjusts backlight for the best picture quality by dynamically adjusting the backlight intensity in accordance with lighting condition in the room. On without Light Sensor Adjusts backlight for best picture quality based on the incoming video signal. Picture format Automatic Refer to ‘Summary of picture formats’ on page 23. Super zoom 4:3 Movie expand 14:9 Movie expand 16:9 Wide screen Unscaled Mode selection PC Turns off image enhancement features which makes the TV to act purely as a monitor.
HDTV Enables image enhancement features to improve picture quality. Auto adjustment The horizontal / vertical position, clock and phase of the PC screen are automatically adjusted. Clock Setting to stabilize the PC screen. Phase Setting to improve the clarity of the PC screen. Horizontal shift Adjusts the horizontal position of the picture for PC screen. Vertical shift Adjusts the vertical position of the picture for PC screen. You must set [Home] in [ Location]. (Refer to page 30.) Otherwise, personalized picture and sound settings will not be memorized after the unit goes to standby mode. Changing picture settings 1 Press MENU on the remote control.
2 Use Î / ï / Í / Æ to select [ Setup] > [ Picture]. Settings assistant Start now Picture Contrast Sound Brightness Color Features Tint Installation Sharpness Color temperature Cool Software update Dynamic contrast Off 3 Use Î / ï /Í / Æ to select one of the picture settings, and press OK to enter the setting. 4 Adjust the picture quality. The following picture settings can be confi gured. Depending on the format of the picture source, some picture settings are not available. Setting items Description Use [ Settings assistant] to guide you through Settings assistant the best picture and sound settings. Adjusts the intensity of bright areas, keeping Contrast dark areas unchanged.
Brightness Adjusts the intensity and details of dark areas. Color Adjusts color intensity. Tint Adjusts the color balance in an image. Sharpness Adjusts the level of sharpness in image details. Cool More blue tones. Color Normal Standard tones. temperature Warm More orange tones. Dynamic Off Sets Dynamic contrast to off. contrast On Automatically enhances contrast in an image. Off Sets Digital Natural Motion to off. Digital Natural Minimum Makes an image smoother. Motion Maximum Makes an image smoothest. Noise Off Sets Noise reduction to off. reduction On Reduces noise in an image. Off Sets MPEG artifact reduction to off.
MPEG artifact reduction On Reduces a blockiness and a blurriness and judder by digital filter. Color Off Sets Color enhancement to off. enhancement On Makes colors more vivid bright colors. settings the remote control. to select [ Setup] > [ Picture] . Picture Settings assistant S Contrast Brightness Color Tint Sharpness Color temperature C Dynamic contrast O tart now ool ff Sound Features Installation Software update to select one of the picture s ng. e quality. ture settings can be confi gure picture source, some picture ettings, and press OK d.
Depending on settings are not Setting items Description Settings assistant Use [ Settings assistant] the best picture and sou to guide you through nd settings. Contrast Adjusts the intensity of b dark areas unchanged. right areas, keeping Brightness Adjusts the intensity and details of dark areas. Color Adjusts color intensity. Tint Adjusts the color balance in an image. Sharpness Adjusts the level of sharpness in image details. Color temperature Cool Normal Warm More blue tones. Standard tones. More orange tones. Dynamic contrast Off On Sets Dynamic contrast to off. Automatically enhances contrast in an image. Digital Natura Motion Off l Minimum Maximum Sets Digital Natural Motion to off.
Makes an image smoother. Makes an image smoothest. Noise reduction Off On Sets Noise reduction to off. Reduces noise in an image. MPEG artifact reduction Off On Sets MPEG artifact reduction to off. Reduces a blockiness and a blurriness and judder by digital filter. Color enhancement Off On Sets Color enhancement to off. Makes colors more vivid bright colors. Note • [ Mode selection] will not be displayed when incoming signals are other than 720 x 480p 60Hz, 1280 x 720p 60Hz and 1920 x 1080p 24 / 30 / 60Hz.