» After successful Wi-Fi connection, the Wi-Fi light indicator will stop pulsing and turn solid. WPS mode If your router has Wi-Fi Protected Setup (WPS), you can set up the connection without entering a password. 1 Press and hold the (Wi-Fi) button for 3 seconds on the soundbar. You will hear a tone and the Wi-Fi light will begin double blink. 2 Press the WPS button on your router. The button is normally marked with this WPS logo. 2 Return to Philips Sound App to name the device. WPS 3 After successful Wi-Fi connection, the Wi-Fi light indicator will stop pulsing and turn solid. 3 After connection, you can change the device name.
There are several names to choose from or create your own by choosing Custom Name at the end of the name list. Otherwise, it follows the default name. 17 EN Note • WPS is not a standard feature on all routers. If your router does not have WPS then use Standard Wi-Fi Setup. • Press the (Wi-Fi) button once if you want to exit the WPS mode or it will automatically exit after 2 minutes.