» Press > select “ SUB PAIR ” > Then press (Enter) to confirm the subwoofer pairing mode. » Follow step in “ Pairing with Subwoofer (FW1) via proprietary RF link » If the successfully connected, CONNECTED is displayed on the display panel. 4 Select and play audio files or music on your Bluetooth device. During play, if a call is coming, music play is paused. Play resumes when the call ends. If your Bluetooth device supports AVRCP profile, on the remote control you can press / button to skip to a track, or press button to pause/resume play. Update firmware via USB Check if there is the latest firmware version on www.philips.com/support.
Search for your model and click on Software and drivers Copy the software update files into USB flash drive, insert USB flash drive on the unit. » Press > select “ UPGRADE ” > PLAY TO START » Then press (Enter) to confirm. » Upgrade finished and restart. To disconnect and pair a new Bluetooth device 1 In Bluetooth mode, press > select BT PAIR ” > Then press (Enter) to disconnect from current connected BT devices and enter the Bluetooth pairing mode. Play from Bluetooth devices Alternatively directly press and hold button for 3 seconds on the soundbar to disconnect from current connected BT devices and enter the Bluetooth pairing mode.
» The display will flashing “ PAIR 2 Follow step 2-3 in “ Play from Bluetooth devices “ above to pair your Bluetooth device. Through Bluetooth, connect the soundbar with your Bluetooth device (such as an iPad, iPhone, iPod touch, Android phone, or laptop), and then you can listen to the audio files stored on the device through your soundbar speakers. 1 Press the button repeatedly on the unit or on the remote control to switch the soundbar to Bluetooth mode. » BT is displayed on the display panel. 2 On the Bluetooth device, switch on Bluetooth, search for and select “ Philips Fidelio FB1 ” to start connection (see the user manual of the Bluetooth device on how to enable Bluetooth).
3 Wait until you hear the voice prompt from the soundbar. 24 EN Note • In an open space without obstructions. The maximum operational range between the soundbar and a Bluetooth device is approximately 10 meters (30 feet). • Compatibility with all Bluetooth devices is not guaranteed. • The music streaming may be interrupted by obstacles between the device and soundbar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency.