8.13. Switching audio soundtrack When playing back video material recorded with two or more soundtracks (these are often in different audio languages or audio formats), you can switch between them during playback. Using [AUDIO] 1. During playback, press [AUDIO] . Pressing [AUDIO] repeatedly switches the audio. For Blu-ray™ discs, [AUDIO] is only available in primary audio. Using [OPTIONS] 1. During playback, press [OPTIONS] to display the play menu. 2. Use to select “Audio”, then press [OK] . 3. Use to select your desired audio, then press [OK] . e.g.) Blu-ray Disc™ 1 / 7 English Dolby Audio-Dolby TrueHD Multi 4. Press [OPTIONS] to exit.
Secondary audio For Blu-ray™ discs, the audio in PiP can be switched. (Refer to “PiP (BONUSVIEW TM ) setting” (page 25).) 1. During playback, press [OPTIONS] to display the play menu. 2. Use to select “Secondary Audio”, then press [OK] . 3. Use to select your desired audio, then press [OK] . 4. Press [OPTIONS] to exit. Note Secondary audio will not be output when secondary video is not displayed or when the HDMI setting for audio output is set to “Bitstream”. (For some Blu-ray™ discs, secondary audio will be output even when secondary video is off.) Some discs allow changing the audio language setting from disc menu. (Operation varies depending on the discs.
Refer to the manual accompanying the disc.) Sound mode cannot be changed during playback of discs not recorded in multiple audio mode. 29 EN