Watching a Blu-ray disc Switching audio mode To watch a Blu-ray Disc 1 Insert a Blu-ray Disc into your player. 2 Press (play) on the remote control of the Blu-ray Disc player. » The Blu-ray Disc might automatically play on the TV. This section describes how to switch audio language in digital mode and how to switch audio in analog mode. DTV If the picture does not appear 1 Press SAP to display the currently selected language and the number of available languages. English 1/3 2 Press SAP repeatedly to cycle through the available audio languages. Available languages differ depending on the broadcast.
[Other] is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French. English 1/3 11.1 11.1 1 Press SOURCE repeatedly to select the Blu-ray Disc player and wait a few seconds for the picture to appear. 2 Use the remote control of the Blu-ray Disc player to play the disc. TV Press SAP to display the currently selected audio mode. While receiving an MTS broadcast, press repeatedly to cycle through the available audio channel.
11.1 11 SAP / STEREO English 1/3 When all audio are available SAP / STEREO SAP / MONO SAP / STEREO SAP / MONO When stereo and monaural audio are available SAP / STEREO SAP / STEREO MONO / STEREO MONO / STEREO MONO / STEREO MONO / STEREO When SAP and monaural audio are available MONO / STEREO MONO / STEREO SAP / MONO SAP / MONO When only monaural audio is available MONO (Cannot be switched) STEREO : Outputs stereo-audio SAP : Outputs second audio program MONO : Outputs mono-audio 14 EN Note • SAP does not control external audio devices. • The information display will automatically disappear in a few seconds.
• The default setting for audio mode can be fi xed, see [Audio Setting] in ‘Changing sound settings’ on page 17.