1.3.5 Actuation Test This function is used to find out whether a specific subsystem or component in vehicles goes well or not, by testing output elements instead of checking in ignition status. EN 1.3.6 Special Function This function is used for data writing operation of electronic control unit. They all belong to this category, such as ECU data calibration, ECU Programming etc. Some Resetting functions are also included in this part. 2. AutoScan (Intelligent Diagnosis) Plug the Phoenix MDCI Pro dongle into the vehicle’s DLC port. Tap “AutoScan” on the Home Menu after connecting to the vehicle.
The tool will start the AutoScan procedure, and automatically read the vehicle’s VIN information, as shown below: Note: A highly stable and solid network connection is required for successful VIN access. 3. Services TOPDON Phoenix Max is equipped with maintenance services to be very beneficial for technicians and mechanics working in the automotive repair industry. 3.1 OIL (Maintenance Light Reset) This function enables you to reset the oil service lamp for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and weather events. 25