Transfer Roller Removal CAUTION: Do not touch the new transfer roller’s sponge with bare skin because oils can damage the roller. Instead grasp the transfer roller’s bushing and shaft. 1 Open the toner cartridge door. 2 Remove the toner cartridge. (See “Toner Cartridge Removal” (page 156) for instructions.) 3 Locate the transfer roller’s black bushing, which is on the left end of the transfer roller’s shaft and just behind the gear. Figure 7-4 Transfer Roller’s Black Bushing 4 Squeeze both of the black bushing’s tabs (see figure 7-5), and then lift the transfer 158 7 Removal and Replacement C4170-90959