Printing Self-Test/Configuration Page The configuration page lists many of the current settings and properties of the printer. To print the configuration page, press and release the G O and J OB C ANCEL buttons simultaneously when the printer is ready. If an EIO card is installed, a JetDirect Configuration Page also prints (see figure 3-4). Configuration Page Elements Figure 3-3 HP LaserJet 2100 Self-Test/Configuration Page 1 Printer Information lists the name, formatter number, serial number, firmware datecode, page count, LocalTalk information (name, node ID, and network number), PostScript Level 2 emulation wait timeout, and HP JetSend address.
2 Installed Personalities and Options lists the installed printer languages (PCL, PCLXL, and PostScript Level 2 emulation) and the options installed in each of the three DIMM slots and the EIO slot. 3 Memory lists total memory, available memory, I/O buffering information, and resource saving information. 4 Status Log lists the PJL status code and the corresponding page count.
(The status log only appears when errors have been registered.) 5 Settings lists settings for copies, paper, wide A4, courier, orientation, form, manual feed, Resolution Enhancement technology (REt), resolution, personality, I/O timeout, reprint, font (source, number, pitch, symbol set, and line term), PostScript Level 2 emulation error reporting, tray (multipurpose tray designation, tray locking, auto continue, density, and tray mode), and I/O buffer. 46 3 Printer Configuration C4170-90959