2 Hardware Specifications and Wiring „ DVP20PM00M „ DVP10PM00M Output point specifications: DVP-PM Application Manual 2-2 Max. input Response Terminal Description time Current Voltage PG0+, PG0-, PG1+, Zero point signal input +, - (differential signal input) 200kHz 16mA 5 ~ 24V PG1- There are two variations according to different operation modes: DOG0, DOG1 1. DOG signal in zero return mode 1ms 6mA 24V 2. Start signal for inserting single speed or 2-speed operation X0~X7 General input points 200kHz 15mA 24V Max.
input Response Terminal Description time Current Voltage START0, START1 For input signals of Start 10ms 6mA 24V STOP0, STOP1 For input signals of Stop 10ms 6mA 24V LSP0/LSN0, Right limit input/left limit input 10ms 6mA 24V LSP1/LSN1 X1/X2 Right limit input/left limit input (COM) (for Z axis) 10ms 6mA 24V MPG A-phase pulse input +, - (differential signal A0+, A0-, A1+, A1- 200kHz 15mA 5 ~ 24V input) (A1+, A1- are shared by Y and Z ) MPG B-phase pulse input +, - (differential signal B0+, B0-, B1+, B1- 200kHz 15mA 5 ~ 24V input) (B1+, B1- are shared by Y and Z) PG0+, PG0-, PG1+, Zero point signal input +, - (differential signal input) 200kHz 16mA 5 ~ 24V PG1- X3 Zero point signal input (COM) (for Z axis) 100ms 6mA 24V There are two variations according to different operation modes:
DOG0, DOG1 1. DOG signal in zero return mode 1ms 6mA 24V 2. Start signal for inserting single speed or 2-speed operation X0 Same as DOG0, DOG1 (COM) (for Z axis) 10ms 6mA 24V X4~X7 General input points 200kHz 15mA 24V Max. input Response Terminal Description time Current Voltage 1. single phase / A-B phase input X0~X7 2. DOG signal for X-Y-Z-A axis: X0, X2, X4, X6 200kHz 15mA 24V 3. PG signal for X-Y-Z-A axis: X1, X3, X3, X7 X10+, X10-, X11+, X11- MPG+/- pulse input (differential input) 200kHz 15mA 5 ~ 24V X12+, X12-, X13+, X13- Differential input 200kHz 15mA 5 ~ 24V