2 Hardware Specifications and Wiring COM1 cover Left-side port cover Ports under left-side port cover Screw driver is required for removing RS-485 terminal COM 2 (RS-485) Removable Terminal Block MANU / AUTO switch COM 1 (RS-232) Battery Wiring Terminals:
See 2.1.2 for detailed electrical specifications DVP-PM Application Manual 2-7 Part Description COM2 (RS-485) F or both master and slave modes MANU/AUTO (STOP/RUN) switch R UN/STOP control COM1 (RS-232) S lave mode (can be used with COM2 at the same time) Battery T he battery shall be changed within 1 minute 24G +24V S/S0 STOP0 LS P0 PG0- S/S1 STOP1 LSP1 PG1- X0 X2 X4 X6 START0 DOG0 LSN0 PG0+ START1 DOG1 LSN1 PG1+ S/S2 X1 X3 X5 X7 DVP-20PM00D ( AC Power IN, DC Signal IN ) A0+ B0+ A1+ B1+ CLR0+ CLR1+ FP0+ RP0+ FP1+ RP1+ Y0 Y1 Y2 Y3 Y4 Y6 START0 DOG0 LSN0 PG0+ STAR T1 DOG1 LSN1 PG1+ S/S2 X1 X3 X5 X7 A0+ B0+ A1+ B1+ CLR0+ CLR1+ FP 0+ RP0+ FP1+ RP1+ Y0 Y1 Y2 Y3 Y4 Y6 A0- B0- A1- B1- CLR0- CLR1- FP0- RP0 - FP1- RP1- C0 C1 C2 C3 Y5 Y7 24G +24V S/S0 STOP0 LS P0 PG0- S/S1 STOP1 LSP1 PG1- X0 X2 X4 X6 START0 DOG0 LSN0 PG0+ START1 DOG1 LSN1 PG1+ S/S2 X1 X3 X5 X7 DVP-20PM00M ( AC Power IN, DC Signal IN ) A0+ B0+ A1+ B1+ CLR0+ CLR1+ FP0+ RP0+ FP1+ RP1+ FP2+ RP2+ Y2 Y3 Y4 Y6 START0 DOG0 LSN0 PG0+ STAR T1 DOG1 LSN1 PG1+ S/S2 X1 X3 X5 X7 A0+ B0+ A1+ B1+ CLR0+ CLR1+ FP 0+ RP0+ FP1+ RP1+ FP2+ RP2+ Y2 Y3 Y4 Y6 A0- B0- A1- B1- CLR0- CLR1- FP0- RP0 - FP1- RP1- FP2- RP2- C2 C3 Y5 Y7