You must have an accessory card installed in an HP DesignJet 500 Series printer to obtain extra copies; proceed as follows: 1 With Job management highlighted ( ), press Enter . 2 You will either see the message Queue is empty , or the name of your job. In the latter case, press Enter to see the options available (including Reprints ), and continue as in Step 5 on page 21 . 7 Finally, press the Menu key to return to the top-level menu. Reprints with the HP DesignJet 500 Series Printers 22 Examples of How to Use the Front Panel See page 25 for more about Queueing and Nesting prints. You can navigate to any of the settings in the table that starts on page 6 in a similar way.