Partial Arming Autnority Leven 3 Depending on the features available with your security system, you have four options for partially arming your premises. See the System Information page at the beginning of this guide for a description of the two partial arm regions and the names assigned to each. The two partial arm regions may be armed with the entrance/ exit delays either active or instant (no entrance/exit delays). You can use the “Clear” key to abort the arming sequence. You may switch from one partial arm to another without disarming. To partial arm your system: 1. Enter your passcode. -ENTER PASSCODE Press “Partial Arm.” SELECT.PARTL ARM Switch between choices DELY.(arming label) ™.
using the “Partial Arm” | key or by pressing the up and down arrow keys. _ SELECT PARTL ARM — ‘INST (arming label} - — Once the desired option appears, press “Enter” or “On/Off? to arm your system. -(arming label} °*- « If partial arming with an ‘COMPLETE . JANO}. © 12:00:15 2 “(arming label) = > =: arming delay time, then exit time will countdown as described above. If partial arming is instant, there will be no exit countdown. -*