Changing Area Definitions Autuority Levet 4 There are two different programming items for Area seconds during which each keypad produces a tone Definitions, entry/exit beeps and exit time. instead of beeps. If an entry point is still faulted after the two seconds, then the system starts entry time. Entry/Exit beeps After arming your system, you have a certain amount of time to exit the premises (exit time). When entering the premises through an arnmed entry point, you have a certain amount of time to enter the premises and disarm To change the area definitions: 1. From the idle display, : (entry time). This feature allows you to set whether or enter your nasscode :
Suna ASSCODE not the control stations beep during entry and exit times. Exit Time ., . . . The exit time is used to determine how much time you have to exit the premises after arming your security system. If you change the exit time, it is recommended that you notify other users of the change. Make sure you 2, You Press are "Program. now in the -MAIN-SYSTEM MENU FUNCTIONS’ i 3. |- asain. sysTEM MENU” "PROGRAMMING: Programming mode. Press “Program” orthe down arrow key until allow yourself enough time to exit the premises. Should PROGRAMMING you exit after the exit time has expired, an alarm may sound. If arming with a delay time, the delay time will appeals. 4.
count down until the exit time expires. If the arming is from a control station and if no entry point is opened during the countdown, the arming delay time will double. If arming is instant, there will be no exit countdown. When exit time ends, if an entry point is faulted, the exit time is extended for another two Press “Enter.” ° 5. : . AREA DEFINITIONS ;: At (area name}-:- Press “Enter.” . . ENTRY/EXIT BEEPS” “YES > Sp aies