Replacement flow The procedure to replace the CP1E with the CP2E is as follows. (Each number shows the number of the section) Precautions for Correct Use ● This guide provides the procedure to replace the CP1E with the CP2E. However, there are differences in functions and performance between these two models, and not all CP1E can be replaced with the CP2E. Please refer to this guide and the manuals to examine replacement carefully. ● After replacement, please perform trial operation before starting actual operation and check that the system operates correctly. This guide does not include sufficient specifications for replacement.
Please refer to the manuals listed on the Related Manuals page and check the specifications before continuing. 1. Confirm the target replacement model. Select the model to be used for replacement. 2. Check the specifications—including the external dimensions and wiring—for differences from the main CP1E and the CP2E specifications. Check the external dimensions, wiring, and other information. 3. Replace the CP1E with the CP2E, and complete the wiring. 4. Convert the programs and settings. Change from the CP1E model to the CP2E model. Check the error and caution reports, and correct the program if necessary. Check the PLC Setup settings. 5.
Transfer the converted program, settings, and data to the CP2E. 6. Perform a test operation. 2