Pop-up pag ge ① ② ⑦ ⑧ Full-screen n 24 5-3-2 GUI ③ ④ ⑤ ⑥ ② ③ ④ ⑤ ⑥ ① ⑦ ⑧ N o Name Des cription 1 [Apply] button Applies the target position, target speed, acceleration, deceleration, and Jerk that you entered to the selected axis. 2 Target position Sets the target position. To directly enter setvalues, use the numeric keypad that will be displayed by pressing in the numeral displayarea. To increment/decrement the set value, press the [+] /[-] button. 3 Target speed Sets the target speed. To directly enter setvalues, use the numeric keypad that will be displayed by pressing in the numeral displayarea. To increment/decrement the set value, press the [+] /[-] button.
4 Acceleration Sets the acceleration. To directly enter setvalues, use the numeric keypad that will be displayed by pressing in the numeral displayarea. To increment/decrement the set value, press the [+] /[-] button. 5 Deceleration Sets the deceleration. To directly enter setvalues, use the numeric keypad that will be displayed by pressing in the numeral displayarea. To increment/decrement the set value, press the [+] /[-] button. 6 Jerk Sets the Jerk. To directly enter setvalues, use the numeric keypad that will be displayed by pressing in the numeral displayarea. To increment/decrement the set value, press the [+] /[-] button.
7 [Deceleration stop] button Decelerates and stops the servomotor. 8 [Operation] button Moves the servomotor to the target position according to the setting. ③