How to Configure a Load-Balancing for CEF Traffic The following sections provide information on configuring load-balancing for CEF traffic. Enabling or Disabling CEF Per-Destination Load Balancing To enable or disable CEF per-destination load balancing, perform the following procedure: Procedure Protocol-Independent Features How to Configure a Load-Balancing for CEF Traffic Command or Action Purpose Step 8 show cef linecard [detail] Example: Device# show cef linecard detail (Optional) Displays CEF-related interface information on a non-stacking switch. Step 9 show cef linecard [slot-number] [detail] Example:
Device# show cef linecard 5 detail (Optional) Displays CEF-related interface information on a switch by stack member for all switches in the stack or for the specified switch. (Optional) For slot-number, enter the stack member switch number. Step 10 show cef interface [interface-id] Example: Device# show cef interface gigabitethernet 1/0/1 Displays detailed CEF information for all interfaces or the specified interface. Step 11 show adjacency Example: Device# show adjacency Displays CEF adjacency table information. Step 12 copy running-config startup-config Example: Device# copy running-config startup-config (Optional) Saves your entries in the configuration file.
Command or Action Purpose Step 1 enable Example: Device# enable Enters global configuration mode. Protocol-Independent Features 4