PulseQ AC Home User Manual GBT Version (EN)

Contents Abbreviations .................................................................................................... 3 Section 1—PRECAUTIONS .................................................................................................... 4 Section 2—STANDARDS COMPLIANCE Section 3— PRODUCT OVERVIEW & INFO .................................................................................................... .................................................................................................... 9 7 Section 4—What's in the Box? ....................................................................................................

13 Section 5—Installation .................................................................................................... 14 Section 6—Network Configuration .................................................................................................... 24 Section 7—LED Indicators .................................................................................................... 30 Section 8—Fault Handling .................................................................................................... 31 Section 9—Warranty ....................................................................................................

32 Abbreviations 3 S/N Abbreviations Description 1 IEC International Electrotechnical Commission 2 EV Electrical Vehicle, this can be BEV (battery EV) or PHEV (plug-in hybrid EV) 3 EVSE Electric Vehicle Supply Equipment [IEC61851-1] 4 OBC On-board charger (of an EV) 5 KW Kilo Watt (unit of Power) 6 A Ampere (unit of Current) 7 V Volt (unit of Voltage) 8 Hz Hertz (unit of Frequency) 9 LCD Liquid Crystal Display 10 LED Light-emitting Diode 11 CMS Central Management System, manages EVSE and has the information for authorizing users for using its EVSE.

12 OCPP Open Charge Point Protocol A standard open protocol for communication between EVSE and a Central System and is designed to accommodate any type of charging technique. (www.openchargealliance.org) 13 HMI Human-Machine Interface

Стр. 3

Section 1—PRECAUTIONS 1.1 IMPORTANT SAFETY PRECAUTIONS WARNING- When using electric products, basic precautions should always be followed, including the following. This manual contains important instructions for Models and PULSEQ AC HOME that shall be followed during the installation, operation, and maintenance of the charging station. 1. Read all the instructions before using this product. 2. This device should be supervised when used around children. 4. 3. Do not put fingers into the electric vehicle connector. Do not use this product if the flexible power cord or EV cable is frayed, has broken insulation, or has any other signs of damage. 5.

Do not use this product if the enclosure or the EV connector is broken, cracked, open, or shows any other indication of damage. 6. Indicate the ambient temperature rating, (-30°C to 55°C ). "CAUTION" and the following or equivalent: "To reduce the risk of fire, connect to a circuit provided with maximum branch circuit overcurrent protection of 40A 1-Phase/20A 3-Phase/40A 3-Phase in accordance with electrical code." 7. 4 Model Current Rating PulseQ AC Home_7K_GBT 40A 1-Phase PulseQ AC Home_11K_GBT 20A 3-Phase PulseQ AC Home_22K_GBT 40A 3-Phase

Стр. 4

1.2 SAFETY NOTES 1.2.1 Safety signs used The following warning signs, mandatory signs and information signs are used in this manual, on and in the AC EV Charger. CAUTION: Warning of electrical hazards. This sign is intended to alert the user that severe personal injury or substantial property damage can result if the device is not operated as requested. ATTENTION: Warning of a dangerous spot or dangerous situation. This sign is intended to alert the user that minor personal injury or material damage can result, if the device is not operated as requested. CAUTION: Do not touch by hands in case of ESD. Indicates the possible consequences of touching electrostatically sensitive components.

No access for unauthorized persons. Use protective footwear. Must wear a safety helmet. Indicates important texts, notes, or tips. 1.2.2 Safety Precautions for Installation Safety protection must be done when installing the EV Charger. Installation must be carried out by personnel with professional qualification, otherwise there is a risk of electric shock. It shall be installed in the place without violent vibration and impact, and placed vertically to facilitate ventilation. It shall be installed on noncombustible materials, or there is a risk of fire. Do not drop any foreign objects, especially metal objects, into the inside of the Charger or there is a risk of fire.

The lead nose of the Charger must be securely attached or there is a risk of damaging the equipment. 5

Стр. 5

1.2.3 Safety Precautions for Maintenance Personnel must always use protective footwear when maintenance work. It is recommended that routine safety inspection visits to Charger be conducted at least once a week. Do not put inflammable, explosive, or combustible materials, chemicals, combustible steam, and other dangerous goods near the Charger, otherwise there is a risk of fire. Keep the charging adapter clean and dry and wipe with a clean, dry cloth if soiled. Do not touch the Charger with your hand when charged. 1.2.4 Safety Precautions for Maintenance Strictly forbidden for minors or persons of restricted capacity to approach the Charger to avoid injury.

Forced charging is strictly forbidden when the electric vehicle or Charger fails. The electric vehicles can only be charged with the engine off and stationary. Do not charge in rainy and thunderous weather. It is strictly prohibited to use the charger when the charging adapter or charging cables are defective, cracked, worn, broken or the charging cables is exposed. If you find any, please contact the supplier in time. 6

Стр. 6