Section 1 - Precautions 1.1 IMPORTANT SAFETY PRECAUTIONS WARNING - When using electric products, the tool's safety precautions should always be followed. Follow the instructions below closely. 1. Read all the instructions before using this product. This manual contains important instructions for the PulseQ AC Lite charger which shall be followed during the installation, operation, and maintenance of the charger. 2. Children should be supervised if they are in the vicinity of the PulseQ AC Lite while the PulseQ AC Lite is in use. Children should not use this device. 3. Do not put any of your or another person's body, clothing, or accessories into the tool's electric vehicle connector. 4.
Do not use this product if the charging cable is frayed, has broken insulation, or has any other signs of damage. 5. Do not use this product if the enclosure or the charging plug is broken, cracked, open, or shows any other indication of damage. 6. Note the the operating temperature rating (-30°C to +50°C). Certified AC Surge Protection Device (SPD) should be installed upstream close to the charging station. SPDs shall comply with standard IEC/EN 61643-11, with specification Up ≤ 2.5kV. Certified Circuit Breakers should be installed upstream close to the charging station, or build in RCD. Circuit breaker, if any, shall comply with standard with IEC 60898-1 or IEC 60947-2 or IEC 61009-1.
4 Model Breaker Current Rating PulseQ AC Lite_7K_C5_EU 40A 1-Phase PulseQ AC Lite_11K_C7_EU 20A 3-Phase PulseQ AC Lite_22K_C5_EU 40A 3-Phase