Section 2 - Standards Compliance 2.1 Safety Standard(s) Conforms to IEC 61851-1: 2017, IEC 62196-2 2.2 Charging Mode and Connection According to IEC 61851-1, the Charging mode of PulseQ AC Lite is Mode 3, and charging connection is Case C. Mode 3: A method for the connection of an EV to an AC EV supply equipment permanently connected to an AC supply network, with a control pilot function that extends from the AC EV supply equipment to the EV. Case C: Connection of an EV to a supply network utilizing a cable and vehicle connector permanently attached to the EV charger. EV charger Vehicle inlet Vehicle connector Cable Fig. 2-1 7