Section 5 - Installation 5.1 Pre-Installation Inspection When unpacking, please carefully check the following: Whether the accessories are missing according to the packing list. Whether there is any damage to the product that occured during transportation. Whether the model and specification of the machine's nameplate are consistent with the order requirements. If any damage or missing parts are found, please do not start the installation, and contact your vendor as soon as possible. Please keep the packing box and packing materials for 1 month for future handling. The paper packaging is recyclable.
5.2 Pre-work Preparation When transporting or moving the EV charger, pay attention to the following points to ensure product safety: This product is electrical equipment. It should be handled with care, avoiding violent vibration and impact. In order to ensure the long-term stable operation of the product, it is recommended to avoid installing chargers in extreme weather, especially as low or high ambient temperatures may affect the installation effect due to expansions and contractions from temperature changes. Space requirement: When the charger is fixed on the wall, the minimum space requirements are shown in Fig. 5-1.
It is suggested that the charger should be installed in a place with good ventilation, no direct sunlight and sheltered from wind and rain. In order to ensure good ventilation, mount the charger vertically with at least the minimum space around all sides. 14