5.4 Wall Bracket Installation Before installation, ensure the homeowner has chosen an installation location that allows the adapter cable (not included) to reach the car's charging port while still providing slack (See Fig. 5-2). Type 2 male to Type 2 female cable (not included) Fig. 5-2 WARNING: In areas with frequent thunderstorms, add surge protection at the service panel for all circuits. Ensure all power and ground connections, especially those at the breaker and bus bar, are clean and tight. Remove all oxide from all conductors and terminals before connecting any wiring. 1. Refer to the Fig. 5-3 to understand the dimensions of the wall bracket.
Please make sure the space on the wall is at least 3.43" Ч 4.21" (87mm Ч 107mm). 87mm 107mm Fig. 5-3 18