Section 1 - Precautions 1.1 IMPORTANT SAFETY PRECAUTIONS WARNING - When using electric products, the tool's safety precautions should always be followed. Follow the instructions below closely. 1. Read all the instructions before using this product. This manual contains important instructions for the PulseQ AC Pro charger which shall be followed during the installation, operation, and maintenance of the charger. 2. Children should be supervised if they are in the vicinity of the PulseQ AC Pro while the PulseQ AC Pro is in use. Children should not use this device. 3. Do not put any of your or another person's body, clothing, or accessories into the tool's charging socket. 4.
Do not use this product if the enclosure or the charging socket is broken, cracked, or shows any other indication of damage. 5. Note the the operating temperature rating (-30°C to +50°C). 6. To reduce the risk of fire, only connect the device to a circuit provided with maximum branch circuit overcurrent protection of 40A 1-Phase / 20A 3-Phase / 40A 3-Phase in accordance with electrical code. Certified AC Surge Protection Device (SPD) should be installed upstream close to the charging station. SPDs shall comply with standard IEC/EN 61643-11, with specification Up ≤ 2.5kV. Certified Circuit Breakers should be installed upstream close to the charging station, or build in RCD.
Circuit breaker, if any, shall comply with standard with IEC 60898-1 or IEC 60947-2 or IEC 61009-1. 4 Model Breaker Current Rating PulseQ AC Pro_7K_S_EU 40A 1-Phase PulseQ AC Pro_11K_S_EU 20A 3-Phase PulseQ AC Pro_22K_S_EU 40A 3-Phase