Tutorial: Building a Simple Project Monitoring device I/O during run time This part of the tutorial shows how to monitor device I/O during run time by using the Log window. 1. On the Home tab of the ribbon, in the Local Management group, click Run . The project runs and the startup screen is displayed. 2. Press ALT+TAB to switch back to the development application. 3. Right-click in the Output window, and then click Settings . The Log Settings dialog is displayed. 4. Select the Field Read Commands , Field Write Commands , and Protocol Analyzer options. 5. Click OK to close the Log Settings dialog. You can now monitor the device I/O during run time. Page 77