Tutorial: Building a Simple Project Deploying your project as a web application This part of the tutorial shows how to deploy your project as a web application, to which remote users can connect with Internet Explorer. For Internet Explorer to work as a web thin client, it must install a browser plug-in that "plays" AVEVA Edge project screens. If your computer is connected to the Internet, then IE will automatically download the control from AVEVA's public server when you connect to a project runtime server for the first time. To deploy your project as a web application: 1. Configure the IP address of the data server.
a) On the Project tab of the ribbon, in the Web group, click Thin Clients . The Project Settings dialog is displayed with the Web tab selected. Web tab of Project Settings dialog b) In the Data Server IP Address box, type the IP address of the web server. For this tutorial, type 127.0.0.1 , which is the standard loopback address (a.k.a. "localhost"). c) Click OK to close the dialog. 2. Make sure the data server is set to start up when you run your project. a) On the Home tab of the ribbon, in the Local Management group, click Runtime Tasks . Page 80