Table A.1 (continued) Table A.2 – Readable parameters 63 Parameter name and designation Modbus address Modbus function Write / Read Hash- code Format, data size Range of values and indication Factory settings Length of network address2) A.LEN 0×0004 0×06, 0×10 / 0×03 0×1ED2 Word (2 bytes) 8 bit 8 bit 11 bit Response delay RS-485 rS.dL 0×0006 0×06, 0×10 / 0×03 0×CBF5 Word (2 bytes) from 0 to 45 0 Notes 1) Setting of parameter SiG works only together with DIP switch (see section 5.4). 2) Parameters that are not displayed in the Setup mode of the device. 3) In Modbus protocol address 0 is reserved for broadcast packages. In OWEN protocol address 255 is reserved for broadcast packages.
Designation and parameter name Modbus address Modbus function Read-only Hash-code Format and size of data Note Current value of the pulse counter Ctr 0×0000 0×0001 0×04 0×A158 Long (4 bytes) – Current counter value in physical units CEU 0×0002 0×0003 0×04 0×B8BC Long (4 bytes) –