How to use this manual Each chapter starts with a table of contents. Following the table of contents is a table containing the techical data and specifications for the chapter's subject. Chapter 00 describes maintenance procedures and provides general information as well as the pre-delivery inspection; it furnishes all torque specifications along with listings of fluids and lubricants. Explanation of symbols This repair manual for the C1 employs the following symbols; please refer to the table for their meanings. Special notices for more efficient procedures L Note: These special notices help technicians work more efficiently when operating, inspecting, adjusting and maintaining motorcycles.
e Attention: Special information and precautionary notices to prevent damage to the motorcycle. Failure to observe these mandatory precautions may invalidate the warranty. d Warning: Precautions intended to protect the rider and/or other individuals against injury as well as potentially fatal hazards. Contents The titles of the operations described in this chapter ............. together with the page numbers Operations • Operations • A dot or period identifies individual procedures described under a title – Previous operations – The hyphen identifies procedures described in more detail under a different title or in another chapter Remove means:
to completely unscrew a retaining component (such as a bolt or screw) or to detach a component (such as an injection rail) and move it enough to gain access to assemblies installed behind it (such as a throttle-valve). Loosen means: to unscrew an attachment (such as a bolt or screw) without removing it entirely from its threaded socket or retainer X Torque specifications: These data are indicated whenever torques deviate from the standards defined in DIN EN 24 014 and DIN 912 ISO.