Key to maintenance intervals • Replace O-ring in cover, if necessary. X Tightening torques: Oil drain plug................................................ 18 Nm Cover to oil sump........................................... 6 Nm – Inspection at 1000 km (600 miles)I – BMW Service at 10,000 km (6000 miles))II – BMW Inspection at 20,000 km (12,000 miles)III – BMW Annual Service IV Quantities: Oil content ................................ 3.50 l (6.16 Imp.pt) Oil content with filter change.......
3.75 l (6.6 Imp.pt) See service data for oil grades................Seite 00.3 Changing engine oil Inspections I, II, III, IV Changing oil in transmission (gearbox) Inspections I, III, IV • [RS] Remove lower section of fairing. • Drain off oil with engine at operating tempera- ture. • Oil drain plug (1) • Oil filler plug (2) L Note: Renew sealing rings. X Tightening torques: Oil drain plug................................................ 20 Nm Oil filler plug ................................................. 20 Nm • Change oil at operating temperature. • Oil drain plug (1). • Remove oil filter cover retainer (2). • Unscrew oil filter with special wrench BMW No. 11 4 650 . Quantities:
Oil filling capacity .................... 0.85 l (1.496 Imp.pt) See service data for oil grades................Page 00.3 L Note: Coat sealing ring on new oil filter element with oil. Screw in oil filter handtight, take note of hint at filter. 00.11 LT000010 1 2 LT000030 LT000030 11 4 650 1 2 LT000020 LT000020 11 4 650 11 4 650