High Speed Outputs High Speed Outputs The High-speed Output (HSO) generates output pulse trains In PLCs that have transistor outputs, the terminal for output bits 0 suitable for open-loop control of a single-axis motion positioning and 1 can be used not only as a usual external output but as pulse system. It generates pulse (stepper increment) and direction signals which you can connect to motor drive systems and perform various output with up to 10kHz. The pulse output can be operated with dedicated instructions, allowing easy control based on pulse train types of motion control. output and pulse width modulation.
Error detection can be available by using the high-speed counter in combination. Unexpected incidents, such as errors in the driving Pulse Train Output system, can be detected by setting the counter so that it counts the feedback pulses from an encoder during positioning. Positioning control with servo motors and stepper motors is Simple positioning control, fine tuning of conveyor’s moving possible without specialized units. distance, etc. are possible by pulse train output.
Conveyor 2 Programm can be combined to create an application for counting pulse signals from the encoders through the high-speed counter inputs and adjusting the pulse output frequency based on the count to synchronize the slave axis speed with the master axis speed. Slave Encoder Stepper Motor Conveyor 1 The speed of conveyor 1 is measured based on the Master encoder pulse count, and pulses are output to the stepper motor according to the measured speed in order to synchronize the speed of conveyor 2. Drive Rievtech Micro PLC Master Encoder Pulse Output Wiring Micro PLC to Stepper Motor Rievtech Micro PLC Stepper Motor Stepper Driver + - DC 12-24V To Motor Dir + Pulse Output - Step + 12