RIEVTECH STUDIO SOFTWARE MANUAL Ш Action The attribute “ Action ” can be “ Press ” or “ Release ” . When “ Press ” is selected, data transmission will be started when the component is pressed down. When “ Release ” is selected, data transmission will be executed when the component is released. Ш Data Type The “ Data Type ” means the type of data to be transmitted. It can be “ Bit ” or “ Word ” . Ш Transmission words It means the number of data transmitted at one time. It can be set “ Constant ” or “ Variable ” . If set “ Variable ” , the register address must be designated. The maximum number of words transmitted in this software is 8192.
Ш Source Address The “ Source Address ” means the first address of the data to be transmitted. The detailed can be seen in the Detailed manual/General functions/Address editor/Standard Bit Address Input or Detailed manual/General functions/Address editor/Standard Byte Address Input . The “ Destination address ” means the first address of data transmission target. The detailed can be seen in the Detailed manual/General functions/Address editor/Standard Bit Address Input or Detailed manual/General functions/Address editor/Standard Byte Address Input . Ш Destination address 148