RIEVTECH STUDIO SOFTWARE MANUAL Notice: The “ Number of words ” is determined by the recipe itself, and it always displays automatically. Ш PLC Address “ PLC Address ” means the target address for recipe file data transmission. It can be the address of PLC connected to HMI or an internal address of HMI. The detailed address editing method can be seen in: Detailed manual/General functions/Address editor/ Standard Byte Address Input . Ш Notice Bit Address A bit address can be set here to monitor the recipe downloading state. The address editing method can be seen in: Detailed manual/General functions/Address editor/Standard Bit Address Input .
This bit address will be kept on during the recipe downloading or uploading, and it will be set to OFF after transmission. l Upload Recipe from PLC If the “ Upload Recipe from PLC ” is selected, the recipe uploading function will be activated. 150