RIEVTECH STUDIO SOFTWARE MANUAL (c) Fig. 32 2.4.3 Project uploading ① Click the “ Upload ” icon on the tool bar, set the communication mode, select to upload the project, and start to upload the project, as shown in Fig. 20. Step 1: click here Step 2: select the commucation protocol Step 3: select the type of upload data source Fig. 20 ② Enter the password for uploading, as shown in Fig. 21. The default password is “ 888888 ” which can be modified in “ Global Settings ” , as shown in Fig. 22. 19 Step 4: click here to start uploading