RIEVTECH STUDIO SOFTWARE MANUAL For example, the option “ Hide ChannelRegister ” is set LW500. Then the curve of Channel 1 is hidden when the bit 0 of the LW500 is ON. The curve of Channel 2 is hidden when the bit1 of the LW500 is ON. l Channel Setting All channels of the data source are displayed here. They are all checked in the “ Use ” Column by default. It means they are all set to display on the trend curve. Note: If one channel is not checked in the "Use" column, that means the data of this channel will not be displayed on the trend curve.
So the corresponding bit of the word register specified in the option “ Hide Channel Register" cannot control the curve of this channel to display or hide. Click one channel in the "Channel Setting" area, the relevant attribute settings of this channel will be displayed below. It is shown as below. 236