RIEVTECH STUDIO SOFTWARE MANUAL It is not checked by default. After check it, the parameters are shown as below. The settings of these options are same to the Trend Curve or the XY Chart, such as the “ Display/Hide the Cursor ” andthe “ Cursor Color ” . l Cursor Data Area Similarly, you can set a "Word Register" as the starting address of the continuous registers here. The first two word registers areused to save the point number where the cursor stays. The registers from the specified register address + 2 are used to save the data of whichthe cursor is crossed with the XY chart.
As shown as above, the starting register is set LW0, and then LW0 and LW1 save the point number where the cursor stays. If there are three channels for the XY chart, the data type of the Channel 1 is "16-bit Unsigned", the second channel is "Single-precision Floating-point Number", the third channel is "32-bit Unsigned", then LW2 (16-bit Unsigned 254