RIEVTECH STUDIO SOFTWARE MANUAL You can use the button "Move Up" or "Move Down" to modify the order of the display items arrangement. The content on the toprow will display on the left of the alarm bar. You can restore the default arrangement by clicking the button "Restore Default ". “ Marquee moving mode ” You can set the scrolling direction of the alarm contents, the step size (Step: 1 to 255 pixels), and the scrolling speed (Speed: 1 to 255*0.1s). “ Alarm StatusDisplay ” The alarm bar only displays the triggered alarms and events. So only the Trigger Color can be changed. “ Date Format ” The “ Date Format ” is used to set the sort order of year (YY), month (MM) and day (DD).
The “ Date Separator ” is used to set the separatoramongyear,month and day. The “ Time Format ” is used to set the time display format. “ LineSpacing and Column Spacing ” The “ Line Spacing ” and the “ Column Spacing ” are to set the ranks spacing of the alarm bar. The unit is pixel and the range is 0-255. l Table The settings of the “ Table ” property TAB are referred to: Detailed manual/General functions/Drawing/Table Drawing . l Display The settings of the “ Display ” property TAB are referred to: Detailed manual/General functions/Drawing/Display . 4.6.13.2 Historical Data Display 303