RIEVTECH STUDIO SOFTWARE MANUAL Ш Search mode There are four fixed search modes supported: “ Check By Date ” , “ Check By Time Range ” , “ Check By Sequence ” and “ Check By User Name ” . The “ Use register to control the search method ” is a dynamic search mode.You can specify a word register to dynamically adjust the search mode. If the word register is 0, the “ CheckByDate ” mode is used.If it is 1, the “ Check By Time Range ” mode is used. If it is 2, the “ Check By Sequence ” mode is used.If it is 3, the “ Check By User Name ” mode is used. The word register address input method is referred to: Detailed manual/General functions/Address editor/Standard ByteAddress Input.
Ш Search trigger bit The option “ Search trigger bit ” is used to specify a bit register to trigger the search function. Note that the search function is not edge-triggered mode. When set the trigger bit 1, the alarm list displays the filtered results. After set the trigger bit 0, the list will display 318