RIEVTECH STUDIO SOFTWARE MANUAL For example, if the value of the "RPI_ coffee: 0" register is 3, the data of the No. 3 group of the recipe “ RP_coffee ” will be cleared when the “ Clear current recipe bit address ” LB0 is set ON. After finish clearing,LB0 will be reset OFF. 4.9.1.6 Note: Clear all recipe bit addresses It is not checked by default. If it is checked, you can specify a bit address.If it isset ON, the data of all the recipe groups will be cleared. After the data is cleared, this bit address will be reset OFF. It is shown as below. 371