RIEVTECH STUDIO SOFTWARE MANUAL The “ Model ” displays the type of the current selected HMI device. 4.10.1.2 Description The detailed information of the current HMI device is displayed in the “ Description ” area. 4.10.1.3 Ethernet setting You can set the Ethernet connection properties for the current HMI device. The setting mode of IP address can be “ Auto IP Address (DHCP) ” or “ Static Address ” . If you select a “ Static Address ” mode, the IP address can be assigned here. Or you can use the SRW registers to set the IP address. When SRB10000=0, the setting mode is DHCP. When SRB10000=1, the “ Static Address ” mode is used to assign the IP address.
You can switch the IP address setting mode by the SRB10000 register. 4.10.1.4 Rotation Display 378