RIEVTECH STUDIO SOFTWARE MANUAL l Turn off Backlight Ш Dim down and wait for You can set a specified time to turn off the backlight after the lightness is adjusted.The default value is 10. That meansit will keep 10 minutes after the backlight lightness is adjusted. Then the backlight will be turned off. Note: The configuration screen will be visible after the backlight is turned off. Ш Turn on backlight upon Alarm/Events If you check the option “ Turn on backlight upon Alarm/Events ” , the backlight will be turned on automatically when the alarms or events occur and the backlight is off during the running.
l Screensaver If you check the option “ Screensaver ” , the ScreensaverWindow will be switched to display when the time is up. The ScreensaverWindow must be specified. It is used to display the company LOGO. l Require Password to exit Screensaver If you check the option “ Require Password to exit Screensaver ” , a system message window will pop up to prompt you to enter the corresponding level password when you want to exit the screen saver window. 384