RIEVTECH STUDIO SOFTWARE MANUAL l Audio If the option “ Trigger Buzzer ” is checked, the internal buzzer of HMI will beep when an alarm occurs. If the option “ Buzzer Timeout ” is checked, you can set the beeping time of the buzzer. If the option “ Audio ” is checked, you can select an audio from the Audio Library as the sound of the alarm or event. You can try to hear the audio by Click the button “ ” . l Action There are three kinds of actions according to the status of the alarm or event. They are “ Triggering ” , “ Confirming ” and “ Recovery Action ” .
You can set the actions in different status for the alarm or event by clicking the title of the setting page “ Triggering ” , “ Confirming ” or “ Recovery Action ” . The actions of “ Triggering ” refers to the actions that they will be executed when the alarm or event occurs. The actions of “ Confirming ” refers to the actions that they will be executed when the alarm or event is acknowledged by manual. The actions of “ Recovery Action ” refers to the actions that they will be executed when the alarm or event exists. Ш Macro 442