RIEVTECH STUDIO SOFTWARE MANUAL l Broadcast Station After checking the “ Broadcast Station ” , you can set a number for the broadcast station. The default is that the “ Broadcast Station ” is not checked. You can determine to use this function or not according to the actual situation. Click the button "OK" to confirm the settings and the "Ethernet PLC" device is added to the “ Ethernet PLC ” settings page. For example, the “ RIEVTECH FBD_ETH ” is selected as the device type. The result of settings is shown as below. If you need to add other EthernetPLCs, you can add them by referring to the above. 464